Electronic Densimeter

Electronic Densimeter resolution 0.001 g/cm3

Model: MDS-300

Manufacturer: Alfa Mirage - Japan

Feature: Solid, Liquid, Powder
Higher accuracy with resolution of 0.001g/㎤, and reference value of 0.0001g/㎤ can be displayed.
Maximum measuring range up to 300g.
Solid Mode:
No need to open and close the lid with new designed Sensor.
Smaller size lid brings less error value, and less operation time.
Improves working efficiency and repeatability with Auto-weighing function. (Semiautomatic measurement)
New function of powder density substituted measurement.
Floating objects and pellets can be measured easily.
Density variation of absorbent sample can be measured.
Selectable measuring time from 5 kinds.
Liquid Mode: ※ Optional kit required
Liquid density temperature compensation by setting liquid coefficient value depending on temperature.
Selectable measuring time.
Accessories: Tweezers, Thermometer, 200g Calibration Weight, Steel Angle, AC Adapter, Interface RS232C, Airtight Windshield

Buy product

Model: MDS-3000

Manufacturer: Alfa Mirage - Japan

Feature: Solid, Liquid, Powder
Bigger sample with weight up to 3kg can be measured.
Minimum resolution of 0.01g/㎤ and reference value of 0.001g/㎤ can be displayed.
Solid Mode:
Improves working efficiency and repeatability with Auto-weighing function. (Semiautomatic measurement)
New function of powder density substituted measurement.
Floating objects and pellets can be measured easily.
Liquid Mode ※ Optional kit required
Liquid density temperature compensation by setting liquid coefficient value depends on temperature.
Selectable measuring time.
Accessories: Tweezers, Thermometer, Steel Angle, AC Adapter, Interface RS232C

Buy product

Model: MD-300S

Manufacturer: Alfa Mirage - Japan

Feature: Solid, Liquid
Minimum density and volume resolution 0.001g/㎤
Maximum measuring range up to 300g.
Solid Mode:
More smooth and easy operation with redesigned Container and chemical resistant Styrol Water Tank.
Only 10 seconds to measure.
Measuring the change rate of density and volume are possible.
Result judgments with Comparator Mode is available.
Optional Setting Mode is available for distinction of uncertain sample or development of new material.
Easy connection to PC with standard equippend Interface RS232C
Liquid Mode ※ Optional kit required
MD-300S can measure the compensated liquid density by setting compensated liquid temperature and compensating temperature rate.
Accessories: Tweezers, Thermometer, 200g Calibration Weight Steel Angle, AC Adapter, Interface RS232C, Airtight windshield

Buy product

Model: SD-200L

Manufacturer: Alfa Mirage - Japan

Feature: Solid, Liquid
Minimum density and volume resolution 0.0001g/㎤.
Maximum measuring range up to 200g.
Solid Mode:
Selectable measuring time from 4 kinds.
Error tolerance can be shown.
Measuring the change rate of density and volume are possible.
Floating objects and pellets can be measured easily.
Liquid Mode ※ Optional kit required
One push operation to change Solid and Liquid Mode.
Only 20 seconds is needed to test.
Only 50cc of liquid sample is needed
Changing liquid sample by replacing the beaker only.
Accessories: Tweezers, Thermometer, 200g Calibration Weight Steel Angle, AC Adapter

Buy product

Model: EW-300SG

Manufacturer: Alfa Mirage - Japan

Feature: Solid
Only 10 seconds to measure density and volume.
Minimum density and volume resolution 0.01g/㎤.
Maximum measuring range up to 300g.
Solid Mode:
Result judgments with Comparator Mode is available.
Easy connection to PC with standard equipped Interface RS232C.
Ethanol can be used as a liquid medium with improved Styrol Water Tank.
Floating objects can be measured.
Measuring the change rate of density.
Accessories: Tweezers, Thermometer, 200g Calibration Weight Steel Angle, AC Adapter, Interface RS232C

Buy product